Online Inquiry

Polyolefin adhesion promoters are specialty polymeric resins designed to enable durable coating and adhesive bonding to low-surface-energy substrates such as polypropylene (PP), thermoplastic polyolefin (TPO), and polyethylene (PE). Because these plastics are inherently non-polar and chemically inert, conventional paints, inks, and adhesives cannot wet or bond to them effectively without surface pretreatment. Polyolefin adhesion promoters solve this challenge by providing a molecular bridge—their non-polar backbone segments are compatible with the substrate, while polar functional groups (often introduced via maleic anhydride grafting or chlorination) provide reactive sites for subsequent coating layers.
These adhesion promoters are supplied in two primary carrier systems, each with distinct performance profiles:
The choice between waterborne and solventborne technology involves trade-offs across multiple dimensions, including adhesion strength, drying speed, regulatory compliance, and total applied cost.
The shift from solventborne to waterborne coating systems has accelerated globally, driven by tightening VOC regulations in the automotive, industrial coating, and printing ink sectors. However, waterborne adhesion promoters are not a drop-in replacement for solventborne grades—they differ fundamentally in film formation mechanism, compatibility with topcoats, and sensitivity to application conditions.
Solventborne systems form films through simple solvent evaporation, producing a dense, continuous polymer layer with excellent intercoat adhesion even under suboptimal application conditions. Waterborne systems rely on a more complex latex coalescence process that is sensitive to ambient humidity, substrate cleanliness, and drying temperature. Selecting the wrong system can result in intercoat adhesion failure, cratering, or inadequate chemical resistance.
Alfa Chemistry offers a comprehensive suite of adhesion promoters spanning chlorinated and non-chlorinated chemistries, delivered in waterborne, solventborne, and solvent-free carrier systems. The product families below represent our most widely specified grades for coating and adhesive applications:
| Product Series | Chemistry | Carrier System | Key Substrate | Solids / Active Content | Price |
| HG-CohesivePro 2001–2004 | Chlorinated Polyolefin (Solventborne) | Xylene / Aromatic 100 | PP, TPO | 25–100% | Inquiry |
| HG-CohesivePro 2005–2006 | Modified Chlorinated Polyolefin (Solventborne) | Xylene / n-Butyl Acetate | PP, TPO, EPDM | 30–57% | Inquiry |
| HG-CohesivePro 2007 | Maleic Anhydride Modified CPO (Waterborne) | Water | PP, TPO, PP/EPDM | 30% | Inquiry |
| HG-CohesivePro 2008 | Ethylene Copolymer (Waterborne) | Water | LDPE, HDPE | 30% | Inquiry |
| HG-CohesivePro 2009 | Modified Polyolefin (Waterborne & Solventborne) | Water / Non-aromatic solvent | PP, Laminates | 30–50% | Inquiry |
| HG-CohesivePro 2010 | Maleic Anhydride Modified Polyolefin (Waterborne) | Water | PP, TPO, EPDM | 26–33% | Inquiry |
| HG-CohesivePro 2011 | Amino Modified Polyolefin (Solvent-Free) | None (100% active) | PP, PE, EPDM | 100% | Inquiry |
The table below compares the two carrier systems across the performance dimensions most relevant to coating and adhesive formulators. Solvent-free amino-modified chemistry is included as an emerging third option.
| Performance Dimension | Waterborne | Solventborne | Solvent-Free (Amino Modified) |
| Adhesion to Untreated PP/TPO | Very Good (selected grades) | Excellent | Good – Very Good |
| VOC Content | < 0.5% to none | 30–70% (xylene-based) | 0% |
| Drying Speed (Ambient) | Slower (humidity sensitive) | Fast (5–15 min) | N/A (used as additive) |
| Minimum Cure Temperature | 50–80 °C | Ambient – 80 °C | Ambient – 80 °C |
| Chemical & Fuel Resistance | Moderate | Excellent | Good |
| Topcoat Compatibility | Waterborne systems | Solventborne & waterborne | Broad (solvent-based & solvent-free) |
| Regulatory Profile | Meets strict VOC limits | Requires emission controls | Zero VOC, best-in-class |
| Storage Stability | Freeze-thaw sensitive | Excellent | Excellent |
| Relative Applied Cost | Moderate | Low – Moderate | Higher (no diluent) |
For automotive OEM and refinish applications requiring maximum chemical resistance and rapid drying under production-line conditions, solventborne chlorinated polyolefins (HG-CohesivePro 2001–2004) remain the performance benchmark. For environmentally regulated markets and manufacturers transitioning to waterborne topcoat systems, waterborne grades (HG-CohesivePro 2007, 2010 series) deliver comparable adhesion with near-zero VOC. For the next generation of zero-emission coating lines, amino-modified solvent-free polyolefins offer a compelling pathway free of both water and organic solvent constraints.
Q: Do waterborne adhesion promoters perform as well as solventborne on untreated polypropylene?
Current-generation waterborne grades such as HG-CohesivePro 2010-B and 2010-C achieve adhesion performance comparable to solventborne CPO on untreated PP and TPO substrates. However, they are more sensitive to substrate cleanliness and drying conditions. In high-speed production environments where rapid solvent flash-off is advantageous, solventborne grades may still be preferred.
Q: Is chlorinated polyolefin the same as a non-chlorinated adhesion promoter?
No. Chlorinated polyolefins (CPO) are produced by chlorinating polypropylene or polyethylene, which increases polarity and solubility. Non-chlorinated adhesion promoters (e.g., HG-CohesivePro 2009, 2010) use alternative chemical modification—typically maleic anhydride grafting or amino functionalization—to achieve adhesion without introducing chlorine into the polymer backbone.
Q: What is the shelf life of waterborne adhesion promoters?
Waterborne polyolefin dispersions typically have a shelf life of 6–12 months when stored in sealed containers at 5–35 °C. They should be protected from freezing, which can irreversibly destabilize the dispersion. Solventborne grades in sealed containers are generally stable for 12–24 months.
References